1. Low Tire Pressure
The most common reason for a tire PSI warning light is low tire pressure. Temperature changes can cause tire pressure to drop. For every 10°F drop in temperature, tire pressure can decrease by 1-2 PSI. If the light comes on during colder months, this may be the culprit.
What to Do:
- Use a tire pressure gauge to check the PSI in all four tires (and your spare, if equipped with a sensor).
- Inflate the tires to the recommended pressure, which you can find in your owner’s manual or on a sticker inside the driver’s door.
- If the light doesn’t turn off after inflating the tires, drive for a few minutes above 20 mph to allow the system to reset.
2. A Tire Is Overinflated
Just as low pressure can trigger the TPMS light, overinflation can also cause problems. Tires inflated beyond the manufacturer’s recommended PSI can affect handling, increase the risk of blowouts, and cause the warning light to stay on.
What to Do:
- Check the tire pressure and release air as necessary to meet the recommended PSI.
- Ensure you check each tire, as overinflation may occur if you’re using a faulty air compressor.
3. A Tire Has a Slow Leak
Sometimes, the tire PSI warning light stays on due to a slow leak caused by a puncture, a worn valve stem, or a damaged wheel. Slow leaks may not be noticeable right away, but they will cause the tire to lose pressure over time.
What to Do:
- Inspect your tires for visible signs of damage, such as nails or sharp objects.
- Spray soapy water on the tread and valve stem. If bubbles appear, you’ve found the leak.
- Patch small punctures with a tire repair kit, but for larger damage, visit a professional.
4. Faulty TPMS Sensor
The TPMS system relies on sensors inside each tire to measure pressure. Over time, these sensors can fail due to age, corrosion, or damage from tire changes.
What to Do:
- If you’ve ruled out tire pressure issues and the light remains on, have the TPMS sensors inspected by a professional.
- Many auto parts stores, like Miller Parts & Paint, carry replacement TPMS sensors if they need to be replaced.
5. TPMS Needs Resetting
In some cases, the warning light stays on because the system hasn’t been reset after inflating the tires or replacing sensors. This can happen if the system hasn’t been calibrated correctly after servicing.
What to Do:
- Check your owner’s manual for instructions on how to reset the TPMS.
- Many vehicles have a reset button located under the steering wheel or in the glove box.
- For some models, you may need a TPMS scan tool to reset the system.
6. Seasonal Tire Swaps or New Tires
If you’ve recently swapped to winter tires or installed new tires, the TPMS light might stay on if the sensors in the new tires aren’t compatible with your vehicle’s system or haven’t been programmed correctly.
What to Do:
- Confirm that the new tires have compatible TPMS sensors.
- Visit a tire shop to have the sensors programmed or replaced if necessary.
7. Electrical or Software Issues
Occasionally, a persistent TPMS warning light may indicate a wiring issue or a problem with the vehicle’s onboard computer.
What to Do:
- Check for other warning lights that might indicate an electrical problem.
- If resetting the TPMS doesn’t work, consult a mechanic to diagnose and repair the issue.
A tire PSI warning light can signal anything from a minor drop in pressure to a faulty sensor or electrical issue. By systematically checking your tire pressure, inspecting for leaks, and resetting the system, you can often resolve the issue yourself. However, for more complex problems like faulty sensors or wiring issues, it’s best to consult a professional.
At Miller Parts & Paint, your trusted NAPA auto parts dealer, we offer everything you need to keep your tires in top condition, from TPMS sensors to tire repair kits. Stop by today for expert advice and high-quality parts to keep your car running safely and efficiently.







